Citizen CMP-10 Portable Printer - Intelligent IT Solution Providers

Go to content

Main menu:

Citizen CMP-10 Portable Printer

Citizen CMP-10 Portable Printer

Citizen CMP-10 Portable Thermal Printer

The Citizen CMP-10 is a thermal printer that features a printing speed of 50 mm./second and a resolution of 8 dots/mm. (203 dpi). The standard paper roll is 58 mm. wide with a 50-mm. diameter; and an optional cover for a 40-mm. diameter roll is also available. The lithium-ion battery has a 3-hour recharging time.

Main Features:  

Paper Drop in Style

IRDA & RS232 interface

Li-ion rechargeable Battery

Low battery monitoring

Belt Clip

Internal Charging Circuit

Belt Clip & Strap holder

Firmware & Font Data loaded through interface

Auto power off function

Factory option: Bluetooth and or 3 track Magnetic stripe car reader

CMP-10 with IRDA & RS232 Interface

Standard with MSR
CMP-10 with IRDA & RS232 Interface & 3 Track MSR

CMP-10 with IRDA, RS232 Interface & Bluetooth interface

Bluetooth & MSR
CMP-10 with IRDA, RS232 Interface, Bluetooth interface & 3-track MSR

Thermal 57 x 50 Paper rolls

Power Supply (option)
9 Volt regulated power supply

RS-232 Cable
RS-232 Cable for the CMP10


Printing Method
Line Thermal Dot Printing

Printing Width
58mm / 384 Dots

Dot pitch
8 x 8 dots/mm 203 dpi

Printing speed
Max. 50 mm/sec

Number of columns
Font A:
32 columns; 12 x 24 dots

Font B:
42 columns; 9 x 16 dots

Character size (W x H)
Font A:
1.25 x 3.00 mm; 12 x 24 dots

Font B:
0.88 x 2.13 mm; 9 x 16 dots

Character Table
ASCII, Windows code (Other codepage data can be loaded)

Bar-code Type
UPC-A/E, JAN13/8, Code39, ITF, Codabar, Code93, Code128

Line spacing
4.23 mm (1/6 inch), software selectable

Max. Width 58mm, Thickness 60-65 µm, Max. Diameter 50 mm

IrDA Version 1.0

RS-232C with optional special cable (1200-115200 bps)

Optional interface
Bluetooth wireless interface

Input Buffer
64 Kbyte

Sensor & Error monitoring
Paper end, Cover-open, Low battery, Head overheat

Optional Mag stripe reader
Track 1, 2 & 3

Power Supply
Li-ion battery 2000mAh

AC adaptor for charging (output DC 9V, 2A) Optional extra

40,000 print lines per charge (Characters)

Maximum recharge time: 3 hours

Auto power off
1-60 minutes (default 10 min.) Software selectable.

Approx. 370g (with battery & belt clip, w/o paper roll)

Dimensions (W x D x H)
116 x 104 x 63 mm (with standard 50 mm ∅ paper cover & MSR

Operating environment
5 ~ 40 ºC

Storage environment
-20 ~ 60 ºC

Thermal head:
100,000,000 pulses or 50 Km

Mechanism (MCBF):
15,000,000 lines

Safety standards
UL, C-UL, TUV, GS, CE Marking, Fcc Class B, VCCI Class B

Back to content | Back to main menu